300W Power Supply Adapter DC Transformer waterproof IP67 for LED Strip 12V 25A

Suitable for led strip lighting, Led Module and Outdoor DC lightings.

Volume discounts

Quantity	Unit discount	You Save
10	20%	£132
25	25%	£413
50	30%	£990
100	40%	£2,640

£66

£55 Tax excluded

Description

SPECIFICATION

Product Name		100 W	150W	200W	250W	300W
OUTPUT	Model	PS5212100	PS5212150	PS5212200	PS5212250	PS5212300
	DC Voltage	12V	12V	12V	12V	12V
	RATED CURRENT	8.3A	12.5A	16.7A	21A	25A
	CURRENT RANGE	0~8.3A	0~12.5A	0~16.7A	0~21A	0~25A
	RATED POWER	100W	150W	200W	250W	300W
	RIPPLE & NOISE	240mVP-P	200mVP-P	200mVP-P	200mVP-P	350mVP-P
	VOLTAGE TOLERANCE	± 2%	±2%	±2%	±2%	±2%
	LINEAR REGULATION	± 1%	± 1%	± 1%	± 1%	± 1%
	LOAD REGULATION	± 1%	±2%	±2%	±1%	±1%
	SETUP RISE TIME	80ms/220VAC
	HOLD UP TIME(Typ.)	60ms/220VAC
INPUT	VOLTAGE RANGE	90V-264VAC			176-264VAC
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR (Typ.)	PF>0.56/220VAC
	EFFICIENCY (Typ.)	.>85%
	AC CURRENT(Typ.)	0.53A/220VAC	0.8A/220VAC	1.1A/220VAC	1.3A/220VAC	1.6A/220VAC
	INRUSH CURRENT (Typ.)	COLD START 40A/220VAC
PROTECTION	SHORT CIRCUIT	Recovers automatically after fault condition is removed
	OVERLOAD	Overload Protected @ 110-130% above Peak rating
	OVER TEMPERATURE	Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMPERATURE	-30-+50℃(Refer to output load derating cure)
	WORKING HUMIDITY	20 ~ 99% RH non-condensing (waterproof)
	STORAGE TEMP. HUMIDITY	-40~+80℃, 10~99%RH
SAFETY & EMERGENCY	SAFETY STANDARDS	CE MARK (LVD), IP67
	WITH STAND VOLTAGE	I/P-O/P:105KVAC I/P-GND:1.5KVAC
	EMC TEST STANDARD	EN55015:2006; EN61547:1995+A1:2000: EN61000-3-2:2006: EN61000-3-3:1995+A2:2005; EN61347-1:2001; EN61347-2-12:2006
NOTE	1. All paramenter Not specially mentioned are measureed at 220vac input, rated load and 25℃ of ambient temperature,
	2. Ripple & noise are measureed at 20MHz of bandwidth by using at 12" twisted pair-wire terminated with a 0.1uf & 10uf parellel capacitor
	3. Tolerance : incudes set up tolerance, line requlation and load regulations.

Comments (0)