Maximize
250W Power Supply Adapter DC Transformer waterproof IP67 for LED Strip 12V 20.8A
Newsletter
Categories
LED Strip LightsPower Supplys12V250W Power Supply Adapter DC Transformer waterproof IP67 for LED Strip 12V 20.8A
Maximize
14 other products in the same category
SPECIFICATION
| Product Name | 100 W | 150W | 200W | 250W | 300W | |
| OUTPUT | Model | PS5212100 | PS5212150 | PS5212200 | PS5212250 | PS5212300 |
| DC Voltage | 12V | 12V | 12V | 12V | 12V | |
| RATED CURRENT | 8.3A | 12.5A | 16.7A | 21A | 25A | |
| CURRENT RANGE | 0~8.3A | 0~12.5A | 0~16.7A | 0~21A | 0~25A | |
| RATED POWER | 100W | 150W | 200W | 250W | 300W | |
| RIPPLE & NOISE | 240mVP-P | 200mVP-P | 200mVP-P | 200mVP-P | 350mVP-P | |
| VOLTAGE TOLERANCE | ± 2% | ±2% | ±2% | ±2% | ±2% | |
| LINEAR REGULATION | ± 1% | ± 1% | ± 1% | ± 1% | ± 1% | |
| LOAD REGULATION | ± 1% | ±2% | ±2% | ±1% | ±1% | |
| SETUP RISE TIME | 80ms/220VAC | |||||
| HOLD UP TIME(Typ.) | 60ms/220VAC | |||||
| INPUT | VOLTAGE RANGE | 90V-264VAC | 176-264VAC | |||
| FREQUENCY RANGE | 50~60Hz | |||||
| POWER FACTOR (Typ.) | PF>0.56/220VAC | |||||
| EFFICIENCY (Typ.) | .>85% | |||||
| AC CURRENT(Typ.) | 0.53A/220VAC | 0.8A/220VAC | 1.1A/220VAC | 1.3A/220VAC | 1.6A/220VAC | |
| INRUSH CURRENT (Typ.) | COLD START 40A/220VAC | |||||
| PROTECTION | SHORT CIRCUIT | Recovers automatically after fault condition is removed | ||||
| OVERLOAD | Overload Protected @ 110-130% above Peak rating | |||||
| OVER TEMPERATURE | Shut down o/p voltage, re-power on to recover | |||||
| ENVIRONMENT | WORKING TEMPERATURE | -30-+50℃(Refer to output load derating cure) | ||||
| WORKING HUMIDITY | 20 ~ 99% RH non-condensing (waterproof) | |||||
| STORAGE TEMP. HUMIDITY | -40~+80℃, 10~99%RH | |||||
| SAFETY & EMERGENCY | SAFETY STANDARDS | CE MARK (LVD), IP67 | ||||
| WITH STAND VOLTAGE | I/P-O/P:105KVAC I/P-GND:1.5KVAC | |||||
| EMC TEST STANDARD | EN55015:2006; EN61547:1995+A1:2000: EN61000-3-2:2006: EN61000-3-3:1995+A2:2005; EN61347-1:2001; EN61347-2-12:2006 | |||||
| NOTE | 1. All paramenter Not specially mentioned are measureed at 220vac input, rated load and 25℃ of ambient temperature, | |||||
| 2. Ripple & noise are measureed at 20MHz of bandwidth by using at 12" twisted pair-wire terminated with a 0.1uf & 10uf parellel capacitor | ||||||
| 3. Tolerance : incudes set up tolerance, line requlation and load regulations. | ||||||
No customer comments for the moment.
